Satel INTEGRA Plus Dokumentacja Pobierz pdf (Strona 7)

SATEL ETHM-1 Plus 5

4. If the module is to supervise the enclosure tamper switch, connect the tamper switch

wires to the TMP and COM terminals. Otherwise, connect the TMP terminal to the module

COM terminal.

5. Connect the module to the Ethernet network. Use a cable compliant with the 100Base-TX

standard (identical as for connecting the computer to the network).

6. Power on the alarm system.

7. Start the identification function in the control panel (see the control panel installer

manual). The module will be identified as " ETHM-1".

8. Configure the module (see "Configuring").

9. If the control panel is to be configured via the module using the DLOADX program, connect

the module RS-232 port to the control panel RS-232 port. Depending on the control panel,

use the following cable to make the connection:

INTEGRA with connector socket of PIN5 type: PIN5/PIN5 (Fig. 3)

INTEGRA with connector socket of RJ / INTEGRA Plus type: RJ/PIN5 (Fig. 4)

VERSA: PIN5/RJ-TTL

The above mentioned cables are available in SATEL's product offering.

Fig. 3. Wiring diagram of the cable connecting RS-232 ports of ETHM-1 Plus module and

INTEGRA control panel with PIN5 connector socket.

Fig. 4. Wiring diagram of the cable connecting RS-232 ports of ETHM-1 Plus module and

INTEGRA / INTEGRA Plus control panel with RJ type connector socket.

1 2 3 4 5 6 7 8 9 10 11 12 ... 26 27

Brak uwag

Satel INTEGRA Plus Dokumentacja Strona 7