Satel SATELLINE-EASy Podręcznik Użytkownika Pobierz pdf (Strona 29)

SATELLINE-EASy Pro

User Guide v.1.5

7.9.2 Configuration in Programming menu

The correct radio compatibility mode can be changed in the Programming mode submenu Radio

settings ->Radio compatibility Mode:

Radio compatibility

-------------------------

1) Satelline-3AS

2) PCC 4-FSK

3) PCC GMSK

4) TRIMTALK GMSK, RX fitted to Pacific Crest transmitters

5) TRIMTALK GMSK, RX fitted to Trimble transmitters

6) PCC-FST

7.9.3 Configuration by using SL commands

“SL@S=” command selects the compatibility mode:

 ”SL@S=0” sets SATELLINE-3AS (default).

 ”SL@S=1” sets PCC-4FSK

 ”SL@S=2” sets PCC-GMSK

 ”SL@S=3” sets TRIMTALK GMSK, RX fitted to Pacific Crest transmitters

 “SL@S=4” sets TRIMTALK GMSK, RX fitted to Trimble transmitters

 “SL@S=5” sets PCC-FST

The modem responds with “OK” message if the requested mode is supported or “ERROR” if the

mode is not allowed.

“SL@S? enquires the active mode. The modem responds with a number:

 “0” if the mode is SATEL 3AS

 “1” if the mode is PCC-4FSK

 “2” if the mode is PCC-GMSK

 “3” if the mode is TRIMTALK GMSK, RX fitted to Pacific Crest transmitters

 “4” if the mode is TRIMTALK GMSK, RX fitted to Trimble transmitters

 “5” if the mode is PCC-FST

7.9.4 Settings

In order to use the Pacific Crest/TRIMTALK modes implemented in SATELLINE modems:

PACIFIC CREST modems must have:

 Protocol Mode =

 Transparent w/EOT Timeout (when using Pacific Crest modulations)

 TrimTalk 450s (when using TRIMTALK GMSK modulation)

 Transparent FST

 Modulation Type depends on the system

 GMSK (default, always selected when using TRIMTALK 450s mode)

 4-Level-FSK

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 103 104

Brak uwag

Satel SATELLINE-EASy Podręcznik Użytkownika Strona 29